Table of Contents
Advertisement
3.1
Installing the Fryer
A. Initial Installation: Legs are installed at the factory. After unpacking, check the legs to ensure
they are properly tightened.
B. Relocating the fryer: Lift the fryer to remove all weight from each leg before moving. Do
not slide the fryer on the legs.
C. If a leg becomes damaged, contact a service agent for immediate repair/replacement.
3.2 Leveling the Fryer
A. All Installations: It is recommended to place the fryer on an even platform.
B. Place a spirit level across the top of the fryer and level the unit both front-to-back and side-
to-side. If the unit is not level, it may not function efficiently, and the oil may not drain
properly.
C. Adjust to the high corner and measure with the spirit level. If floor is uneven, level the unit
with the screw adjustments on each leg (see illustration below).
clearances as discussed in Chapter 2 are maintained during the leveling procedure.
Hold back-up with adjustable
wrench here.
TRIATHLON SERIES GAS FRYERS
CHAPTER 3: INSTALLATION
3-1
Ensure minimum
Adjust here to level fryer. Do
not exceed 1" adjustment.
Advertisement
Table of Contents
