Notes On Access To Usb Fdd; Note On Acces To Usb Fdd - NEC N8800-162F User Manual

Notes on access to USB FDD

When you attempt an access by directly specifying an sd device name as described below while a
USB FDD is connected, the device name may be changed due to separation or integration of one of
the PCI modules, which can destroy partition information etc. of other disks unintentionally.
[Example]
If you execute a command for the USB FDD after you integrate one of the PCI modules with the
same sd device name that was specified before the system was separated, partition information etc.
of the disk A is destroyed.
Transition of sd device names
Before one of the PCI
modules is separated
After one of the PCI
modules is separated
After one of the PCI
modules is integrated
1) Before one of the PCI modules is separated
# tar cf /dev/sdb files
→ Files are written in the USB FDD.
2) After one of the PCI modules is integrated
# tar cf /dev/sdb files
→ Files are written in the disk A unintentionally → partitions are destroyed
NOTE:
It is a feature of NEC Express5800/ft series that the device names of the device files change
due to integration or separation of one of the PCI modules.
Disk A
sda
none
sdb
Linux Setup and Operation 3-19
USB FDD
sdb
sda
sda
Disk B
sdc
sdc
sdc