Power On - NEC N8800-162F User Manual

2-22 General Description

Power ON

To power on NEC Express5800/ft series, press the POWER switch (the one whose in-built LED
is lit).
Follow the steps below to turn on the power.
1.
Power on the display unit and other peripheral devices connected to the server.
CHECK:
If the power code is connected to a power controller like a UPS, ensure
that it is powered on.
2.
Remove the front bezel.
3.
Press the power switch
located on the front panel.
Lift up the acrylic cover in
front of the power switch,
and press power switch of
the front panel.
After a while, the "NEC"
logo will appear on the
screen.
IMPORTANT:
Do not turn off the power
before you see the "NEC"
logo and a character below
the logo.
While the "NEC" logo is
displayed on the screen,
NEC Express5800/ft series
is performing a power-on
self test (POST) to check
itself. For details, see
"POST Check" described later in this chapter.
Upon the completion of POST, OS will start.
CHECK:
If the server finds errors during POST, it will interrupt POST and
display the error message. See Chapter 7.
Acrylic cover
Power Switch