NEC N8800-162F User Manual page 82

3-14 Linux Setup and Operation
Restart the PCI module.
4.
From the ft server utility, click [Start] of [PCI Module Start/Stop] to the PCI module
which was stopped in the step 3, and the PCI module will be started. Once the PCI
module is started, PCI module diagnosis, mirror volume duplication and PCI module
duplication are performed.
The PCI modules' status LEDs changes as shown below:
[Indications of the status LEDs]
Immediately after the PCI module startup until the completion of diagnosis:
1 PRIMARY LED
2 DISK ACCESS LED
3 System FT LED
When duplication of disks is started after the completion of PCI module diagnosis:
*
The status of LEDs varies depending on the method of disk duplication.
1 PRIMARY LED
2 DISK ACCESS LED
3 System FT LED
After the completion of disk duplication and when the PCI modules are duplicated:
1 PPRIMARY LED
2 DISK ACCESS LED
3 System FT LED
LED
LED
LED
LED
LED
LED
Secondary
-
-
System
-
Secondary
-
Amber or Green
blinking (Green
when accessing to
HDD)
System
-
Secondary
-
Green blinking
System
Green
Primary
Green
Amber or Green
blinking (Green
when accessing to
HDD)
Primary
Green
Amber or Green
blinking (Green
when accessing to
HDD)
Primary
Green
Green blinking