NEC N8800-162F User Manual page 84

3-16 Linux Setup and Operation
ft server utility
The following status LEDs changes occur when stopping CPU module:
[Indications of the status LEDs]
1 PRIMARY LED
2 DISK ACCESS LED
3 System FT LED
Restart the CPU module.
3.
In the ft server utility, select the stopped CPU module and click [Start] of [CPU Module
Start/Stop].
Once the CPU module is started, hardware diagnosis and then synchronization of memory
(memory copy) are performed, and the duplication process is completed.
Note that the system is paused temporarily for copying memory during memory
synchronization.
[Indications of status LEDs after completion of duplication]
1 PRIMARY LED
2 DISK ACCESS LED
3 System FT LED
LED
LED
LED
LED
CPU Module
CPU/IO MODULE 0
(Stopping)
Green
Green
System
CPU/IO MODULE 0
(Operating)
Green
Green
System
Green
CPU/IO MODULE 1
(Operating)
-
Green
-
CPU/IO MODULE 1
(Operating)
-
Green