Table of Contents
Advertisement
6-10 Maintenance
MAINTENANCE TOOLS
The Maintenance Tools is a tool of this product for preventive maintenance, as well as for trouble
analysis and its settings. Follow the below procedure to start the Maintenance Tool.
IMPORTANT:
This guide contains procedures to use a floppy disk, however, your server is not equipped with
factory-installed floppy disk drive. Use the optional Flash FDD or USB FDD.
Starting the Off-line Maintenance Utility
The Off-line Maintenance Utility may be started in the following ways.
1.
Boot peripheral devices at first, then power on the Express server.
2.
Load the [EXPRESSBUILDER] DVD into the optical disc drive of the Express server.
3.
After loading the DVD, reset (by pressing <Ctl> + <Alt> + <Delete> keys) or power off and
on to reboot the Express server.
Following menu appears on the DVD.
Tool Menu:
Select this to launch the Off-line
Maintenance Utility.
Advertisement
Table of Contents
Troubleshooting
