NEC N8800-162F User Manual page 102

4-12 System Configuration
I/O Device Configuration
When you select "I/O Device Configuration" in the Advanced menu, the following screen appears.
If you select a menu with the "►" mark and press Enter, its submenu appears.
Refer to the table below for information on options.
Option
Serial Port 1
Base I/O address
Serial Port 1
Connection
Serial Port 2
Parameter Description
Specify whether or not to enable Serial Port 1.
Disabled
[Enabled]
Auto
[3F8/IRQ4] Specify the I/O address and IRQ of Serial Port 1.
2F8/IRQ3
3E8/IRQ4
2E8/IRQ3
[Serial Specify Serial Connector or Internal Modem for
Connector] Serial Port 1 connection.
Internal
Modem
Disabled Specify whether or not to enable Serial Port 2.
[Enabled]
Auto