NEC N8800-162F User Manual page 109

See the table below for setup options on the screen.
Option Parameter
Supervisor [Unset]
Password is
Set
User Password [Unset]
is
Set
Set Supervisor [Enter]
Password
Set User [Enter]
Password
Password on [Disabled]
boot
Enabled
IMPORTANT:
If you have logged in SETUP by using the Supervisor Password, you can check and change all
settings. If you have logged in SETUP by using User Password, you can see the settings but
cannot make changes on the settings except System Time, System Date and User Password of
Main.
Description
Indicates Supervisor password setup status (view
only).
Indicates User password setup status (view only).
Press Enter to display the supervisor password
entry screen. This option is available only when
you log into the SETUP utility with the supervisor
password.
Press Enter to display the user password entry
screen. With a user password, accessing the
SETUP menus is restricted.
Specify whether to request a password entry at
boot-up. User password setup is required
beforehand.
System Configuration 4-19
[ ]: factory default