NEC N8800-162F User Manual page 121

Option
FRB-2 timer
PCI Enumeration
Monitoring
PCI Enumeration
Monitoring Timeout
Option ROM Scan
Monitoring
Option ROM Scan
Monitoring Timeout
OS Boot Monitoring
OS Boot Monitoring
Timeout
POST Pause Monitoring
POST Pause Monitoring
Time-out
Parameter
Disabled Select whether or not to enable the FRB-2 timer.
[Enabled]
Disabled Select whether or not to enable the function to monitor
PCI Device scan.
[Enabled]
60-[180]-1200 Set the timeout for PCI Device scan. (unit: second)
Disabled Select whether or not to enable the function to monitor
the extended ROM scan.
[Enabled]
60-[300]-1200 Set the timeout of the extended ROM scan. (unit:
second)
Disabled Select whether or not to enable the function to monitor
OS boot-up. If you are starting up from an OS with no
[Enabled]
NEC ESMPRO Agent installed, disable this option.
60-[600]-1200 Set the timeout at OS boot-up. (unit: second)
Set whether or not to enable the POST monitoring
Disabled
function during boot pause. (unit: second)
[Enabled]
60-[180]-1200 Set the time for POST monitoring during boot pause.
(unit: second)
System Configuration 4-31
Description
[ ]: factory default