Maintenance Tools; Starting Maintenance Tools - NEC N8400-086F User Manual

MAINTENANCE TOOLS

The Maintenance Tools is a tool of this product prevention to maintain, and to analyze the trouble.

Starting Maintenance Tools

The Maintenance Tools is started according to the following procedure.
1.
Turn on peripheral devices and the server in this order.
2.
Insert the NEC EXPRESSBUILDER DVD supplied with your server into the optical disk
drive of your server.
3.
Press Ctrl, Alt, and Delete to reboot the server from the NEC EXPRESSBUILDER.
(You may also turn off and then on again to reboot the server.)
System boots up displaying Boot selection menu.
IMPORTANT:
"Os installation" starts by the automatic after the Boot selection menu is
displayed.
4.
When a local console is used, "Tool menu (Normal mode)" is selected.
Moreover, "Tool menu (Redirection mode)" is selected when using it with remote console.
An initial selection of the menu is "Os installation".
Troubleshooting 8-27