Table of Contents
Advertisement
40
STATUS menus
IN 720p 59.94
REC 1080i 29.97
Record Mode
The STATUS menus display I/O status and Alarm information. The STATUS menu can
be accessed almost anytime and will not change any active transport modes. Like the
CONFIG and MEDIA menus, STATUS display screens can be viewed by pushing the
SELECT up or down buttons. Pressing STATUS will exit the screens and return to
TRANSPORT mode, where an action could still be occurring (like playback or even
recording).
Record and Play Modes
Line 1: Status (Record) displays the input format; the 4 characters on the right display
the selected input video format: SDI, CMP, HDMI. Status (Play) displays the media
format.
Line 2: Status (Record) displays the record format; the 4 characters on the right
display the selected audio input: SDI, XLR, or HDMI.
Second STATUS page—shows the timecode setting prior to recording. With the
STATUS button selected, press SELECT up to see the second page.
Here are some STATUS display examples:
SDI
XLR
TC In
01:00:00:00
Second STATUS page: Timecode setting prior to recording
Alarm Status
The Alarm menu displays warnings and alarms. Some alarms will automatically be
shown on the display. Others will only be seen by checking the STATUS displays
(press Select up/down to cycle through them). If everything is OK, a "SYSTEM
NORMAL" message will be seen when you cycle through the STATUS displays.
SYSTEM NORMAL
You will be alerted to an alarm condition by having all backlit keys and the display
flash to full intensity for 2 seconds. If more than one alarm state is active, the display
holds each alarm notification for 3 seconds before cycling to the next alarm. These
alarm notifications override whatever the display is currently showing for the
TRANSPORT or STATUS menus. Once there is a Ki Pro alarm active (e.g. Invalid
Selection) the STATUS button light blinks for as long as the alarm is present. This
alerts you so you'll know the reasons for the alarm condition are still active. You can
then press the STATUS button to determine what the alarm condition is.
Media Format
Output Conversion mode
Play Mode
TC Value
Advertisement
Table of Contents
