Table of Contents
Advertisement
19.1 USE CUSTOM CLIP NAME
19.2 CUSTOM CLIP
NAMEE
19.4 CUSTOM
TAKEE
22.1 GANG CLIP NAME
Ki Pro Rack Installation and Operation Manual — MEDIA menus
19.1 USE CUSTOM CLIP NAME
This parameter enables or disables whether a custom clip name can be used via menu
parameters 19.1, 19.2, and 19.4, or via the web UI.
OFF (default)
ON
19.2 CUSTOM CLIP NAME
This parameter defines a custom clip name. The custom clip name is defined via the
front panel select and adjust up/down arrows. The default name is "CUSTOM".
variable
19.4 CUSTOM TAKE
This parameter defines a custom take. The custom take number is defined via the front
panel select and adjust up/down arrows.
1 to 999
(default = 1)
22.1 GANG CLIP NAME
This parameter is used when performing gang recording via multiple Ki Pros (refer to
Controlling Multiple Ki Pros later in this manual). If the desire is to have clips named the
same across all Ki Pro ganged units' recordings, then use the "Master Name" selection in
this parameter. If the desire is to have clips named independently on Ki Pro units, then
"Slave Name" should be selected. Selecting "Slave Name" means that the recording will
take it's name from the individual Ki Pro's parameters and not accept the value pushed
to the Slave by the Master Ki Pro.
Master Name (default)
Slave Name
Enable defining of custom clip name
Disable defining of custom clip name
Using the adjust buttons, enter a custom clip name.
Using the adjust buttons and the top Select button, select
the characters for the name. The adjust buttons scroll
through the choices and the top Select button advances
to the next character. While selecting characters, the
character being changed will flash to show its position.
Certain characters may not be allowed or supported if
entered for a clip name. Examples include: punctuation
marks (other than internal spaces or periods), special
characters (like @), and non-ASCII UTF-8 characters are
rejected outright. Note: non-UTF-8 characters appear in
some languages, like Chinese and Japanese, and are not
supported.
Default: CUSTOM
Press ADJUST button up or down to change the
TAKE value from 1 to 999, if a value other than the
automatically generated value is desired.
Name clips the same across all Ki Pro ganged units
Name clips independently on Ki Pro units
49
1
Advertisement
Table of Contents
