Table of Contents
Advertisement
Software
What's In The Box?
Ki Pro Rack Installation and Operation Manual — What's In The Box?
• Remote Browser control software. When a Mac® or PC are connected via the
Ki Pro Ethernet port, the device can control the Ki Pro via a web browser
• 20 Preset registers for storing and recalling system preset configurations
• Embedded internal web server for remote control via LAN
• Gang recording using a master Ki Pro to control other units (CONFIG 35.4)
• RS422 serial port control of Ki Pro for VTR-like interaction with edit
controllers or non-linear editors (see CONFIG parameter 35.2 explained in
Chapter 3)
• Alarms to alert you to conditions that may need your attention
When you unpack your Ki Pro Rack, you'll find the following components:
• Ki Pro CD-ROM—contains documentation, including this manual (PDF).
• Ki Pro Rack Recorder.
• BNC termination—place on the Ref Loop output at the end of the loop.
• Four Rubber adhesive feet for placing on the bottom of Ki Pro Rack.
• Two AC power cords for redundant 100-240 VAC 50/60 Hz power.
• Read Me First Notice—late-breaking news and errata related to Ki Pro Rack.
• Registration Sheet—register by mail or online (details provided).
Please save all packaging for shipping the Ki Pro should you wish to do so when
moving or sending it in for service.
Ki Pro Documentation CD
Read Me First Notice
and Registration Sheets
AC Line Cords
Ki Pro Shipping Box Contents
Four Adhesive Feet
Ki Pro Rack Recorder
1
Ki Pro
Installation and Operation
Manual
in PDF format on CD
Ref Loop BNC Termination
13
Advertisement
Table of Contents
