Audio Input; Audio Channels - AJA KiProRack Installation And Operation Manual

Compact, 1 ru rack-mounted digital video recorder
Table of Contents

Advertisement

54

2.2 AUDIO INPUT

2.3 AUDIO CHANNELS

2.2 AUDIO INPUT
This parameter selects an audio input source from the audio input connections
available, including embedded SDI audio which requires an SDI video source and
HDMI audio, which requires an HDMI video source.
Note: The message, "WARNING A/V Mismatch" may appear if SDI video is selected and HDMI
audio is selected or vice versa. Embedded audio, via SDI or HDMI, must be matched to the
video source. Analog audio can be used with any video input.
SDI (default)
AES
XLR
HDMI
Note: XLR input could be microphone level or line level, depending on the connector panel
switch setting.
2.3 AUDIO CHANNELS
This parameter selects the use of either two or eight audio channels via SDI
embedded or AES audio. Generally, when working with camera sources, there are
only one or two audio tracks being produced, and therefore 2 channel would be the
appropriate selection. In post production use, there are often more channels of audio
required, so 8 channel audio may be the appropriate choice in such situations. Ki Pro
only allows for the selection of either 2 channels or 8 channels of audio to be written
to the QuickTime file that is recorded. Therefore, if the source has more than 2
channels of audio, but less than 8 channels of audio that need to be preserved, the
CONFIG Menu parameter 2.3 Audio Channels would need to be set to "8 Channels."
Note: Not all devices support 8 channel audio. Ki Pro does not provide a "mixdown" option
for 8-channel recordings on output, so be sure to use devices that support 8-channel
audio via SDI or AES if the 8 channels recorded are desired.
2 Channels (default)
8 Channels
Note: if any selection other than SDI or AES is made (XLR or HDMI) when 8 channels is
selected, the Ki Pro will provide a warning prompt, "WARNING 2 Channel Format".
Selects SDI embedded audio from the SDI input
connector (if SDI video input is selected)
Selects the AES BNCs to provide the audio input
Selects the XLR input for audio input
Selects HDMI embedded audio (if HDMI video input is
selected)
Selects recording of 2 SDI embedded or AES audio
channels
Selects recording of 8 SDI embedded or AES audio
channels

Advertisement

Table of Contents
loading

This manual is also suitable for:

Ki pro rack

Table of Contents