Table of Contents
Advertisement
26
Storage
Removable Storage
Modules (HDD or
SSD)
Formatting Media
Record hours of media to portable removable hard-drive storage modules with built-
in FireWire 800. Ki Pro Rack media may also be used with Windows OS editing
systems when third party software, such as MediaFour's MacDrive, is installed. Both
media types mount on your OSX desktop for immediate editing and file access.
Caution!
Failure to properly mount or dismount media, or an unexpected loss of power
while recording, can result in an unrecoverable data loss.
The Ki Pro Solid State Storage Module (SSD) is recommended for mobile
environments where shock-proof sturdiness may be needed. The Ki Pro SSD Storage
Module offers the ultimate in media reliability. For non-mobile applications you can
also use 250GB HDD Storage Modules.
You may also choose to purchase extra SSD or HDD Storage Modules so you can
quickly load and unload media from the Ki Pro unit while on set.
Storage Modules can be powered via the FireWire 800 cable, or via an AC adapter
(supplied).
Check with your AJA dealer or the AJA website for Storage Module offerings as
capacities and models may change.
Firewire 800
Connector
Power connector
(AC Adapter)
Storage Module (HDD and SSD look identical—see label underneath for type)
To reformat storage media, it must first be selected using the SLOT button (see
previous topic). After selecting the media, follow these steps:
1. Press the STOP button
2. Press the MEDIA button
3. Press SELECT (up or down) repeatedly until you see the menu 16.1 Format
Media.
4. Press ADJUST up arrow. Ki Pro will display "FORMAT". Press the ADJUST up
arrow button. Ki Pro will display "CONFIRM ERASE"—press and hold the
ADJUST up arrow button for 2 seconds or longer and then formatting will
begin. Ki Pro will display progress, and when it is done, "Format D1 Complete"
will be displayed; press the stop button to begin using the newly formatted
media.
Advertisement
Table of Contents
