1.8 HDMI OUT
1.9 SUPER OUT
2.1 VIDEO INPUT
Ki Pro Rack Installation and Operation Manual — CONFIG menus
1.8 HDMI OUT
This parameter defines whether the HDMI output matches the file format or has the 1.5
OUT CONVERT selection applied to it.
FILE FRMT (default)
OUT CONVERT FRMT
1.9 SUPER OUT
This parameter provides superimposition of timecode and transport state (Record,
Pause, etc.) onto the SDI output.
Off (default)
SDI2
2.1 VIDEO INPUT
This parameter selects a video input source from the video input connections available.
This is the video that will be recorded and/or passed through.
Note: The message, "WARNING A/V Mismatch" may appear if SDI video is selected and HDMI
audio is selected or vice versa. Embedded audio, via SDI or HDMI, must be matched to the
video source. Analog audio can be used with any video input.
SDI (default)
HDMI
COMPONENT
Output with the same format as the file
Output using the selection in 1.5 OUT CONVERT
Superimposition is disabled
Superimposition is enabled for the SDI2 output
Selects SDI input connector
Selects the HDMI input connector
Selects the Component input connectors
53
1