AJA KiProRack Installation And Operation Manual page 77

Ki Pro Rack Installation and Operation Manual — Web Browser via Ethernet
SLOT: This button serves two purposes. First, it selects which storage slot is accessed by
the system. Second, the SLOT button is used to unmount a currently selected piece
of media.
Caution!
Not using the SLOT button to unmount media before removal can cause
problems with the files stored on that media.
Pushing the SLOT button cycles between unmounting media and selecting
media. This function is only active when in the "STOP" mode and requires a
"PRESS STOP TO CONFIRM" if not stopped. After you select a slot, the system
returns to the last selected clip and timecode for that slot. If the media has been
changed since the slot was last selected (physically removed/media replaced),
then the "first" clip on the media will be "cued" to its start point. If inserted media
has any issues, additional prompts may be displayed as appropriate such as:
"WARNING FRMT MEDIA" or "WARNING MEDIA LOW."
Show Gang View: When clicked, the Transport screen expands at the bottom to show
controls for controlling multiple Ki Pros. See
end of this chapter for an additional tutorial on using this feature.
Ki Pro Web Interface, Transport Screen Gang View
1
"Gang Recording" on page 86
77
at the