Da5 - Status Data Byte 12, Bit 4; Da6 - Status Data Byte 12, Bit 5 - AJA Ki Pro Ultra Machine Control Manual

3.35 Color Frame Lock – Status Data Byte 8, Bit 3
This bit will be high whenever the device is in normal forward playback or record
and is rolling.
3.36 Deterministic Play Armed – Status Data Byte 10, Bit 0
This bit will be high whenever the device has been armed for deterministic
playback via the deterministic play arm command. However, it will only be set if
the conditions support arming for deterministic playback (see the "Deterministic
Playback" section for further details). It will be cleared upon completion of a
deterministic playback.
3.37 Deterministic Play Ready – Status Data Byte 10, Bit 1
This bit will be high whenever the device is ready for deterministic playback.
This will happen sometime after the device has been armed for deterministic
playback. Only after this bit is high will deterministic playback be assured to be
frame accurate.
3.38 DA1 – Status Data Byte 12, Bit 0
This bit reflects the DA1 edit preset value set by the Edit Preset command. This
device has limited edit support. Please refer to the "Editing" section below for
further details.
3.39 DA2 – Status Data Byte 12, Bit 1
This bit reflects the DA2 edit preset value set by the Edit Preset command. This
device has limited edit support. Please refer to the "Editing" section below for
further details.
3.40 DA3 – Status Data Byte 12, Bit 2
This bit reflects the DA3 edit preset value set by the Edit Preset command. This
device has limited edit support. Please refer to the "Editing" section below for
further details.
3.41 DA4 – Status Data Byte 12, Bit 3
This bit reflects the DA4 edit preset value set by the Edit Preset command. This
device has limited edit support. Please refer to the "Editing" section below for
further details.
3.42 DA5 – Status Data Byte 12, Bit 4
This bit reflects the DA5 edit preset value set by the Edit Preset command. This
device has limited edit support. Please refer to the "Editing" section below for
further details.
3.43 DA6 – Status Data Byte 12, Bit 5
This bit reflects the DA6 edit preset value set by the Edit Preset command. This
device has limited edit support. Please refer to the "Editing" section below for
further details.
Ki Pro Ultra Products Machine Control Guide v3.0 21 www.aja.com