Storage; Expresscard/34 Memory Cards - AJA Ki Pro Installation And Operation Manual

16

Storage

ExpressCard/34
Memory Cards
Warning!
Ki Pro has no user-serviceable parts. To remove power from the unit, remove the
4-pin XLR power connector to ensure disconnection. Refer all servicing to
qualified service personnel. Servicing is required when the device has been
damaged in any way, such as power-supply cord or plug is damaged, liquid has
been spilled or objects have fallen into the device, the device has been exposed
to rain or moisture, does not operate normally, or has been dropped.
Warning!
Do not defeat the safety purpose of the polarized or grounding-type plug. A
polarized plug has two blades with one wider than the other. A grounding type
plug has two blades and a third grounding prong. The wide blade or the third
prong are provided for your safety. If the provided plug does not fit into your
outlet, consult an electrician for replacement of the obsolete outlet.
Warning!
Since the Mains plug is used as the disconnection for the device, it must remain
readily accessible and operable.
Warning!
Protect the power cord from being walked on or pinched particularly at plugs,
convenience receptacles, and the point where they exit from the device.
Record hours of media to a portable removable hard-drive storage module with
built-in FireWire 800, or to flash-based ExpressCard/34 cards (feature not available in
version 2.0), that both instantly mount on your OSX desktop for immediate editing
and file access. Ki Pro ships with a 250GB hard disk that can store up to 2 hours of
1080i Apple Pro Res 422 HQ media or 4 hours of standard 1080i Apple Pro Res 422 (or
even more for standard definition). For additional storage you can buy a variety of
storage types.
Caution!
Failure to properly mount or dismount media, or an unexpected loss of power
while recording, can result in an unrecoverable data loss.
Although AJA doesn't make or sell ExpressCard/34 memory cards, Ki Pro provides
two slots where they can be used (ExpressCards Media not supported yet in version
Version 2.0). With the rapid industry development of these cards and many
manufacturers providing them, brands and models will change often. AJA will post
on the Ki Pro support web page which brands AJA has tested and found to work
acceptably. Since cards have to be fast enough to sustain throughput without
dropping frames, not all ExpressCard/34 cards will qualify for Ki Pro usage.
Search here to find list of qualified cards:
http://www.aja.com/support/ki-pro/ki-pro.php
ExpressCard/34 Memory Card