Operation Mode; System (Platform) Level Setting; Dvd/Usb Setting; Power Related - NEC Express5800/A1080a User Manual

Operation Mode

The server supports the following operation modes, and these modes can be set and changed.
Each setting can be changed on EXPRESSSCOPE
Refer to the corresponding section of "Hardware" for details on the setting procedure, etc.

System (Platform) Level Setting

DVD/USB Setting

Operation Mode
Switch DVD and Front USB
• Set which of the server is used for
the DVD drive in the front of the
server and the USB port on
A1080a-D model.

Power Related

Operation Mode
Power Redundancy
• Power redundancy setting
Policy when Power Redundancy
Lost
• Set processes when power
redundancy is lost (priority on
performance/keeping
redundancy/recovering
redundancy)
Processor Power Control
• Set processor power consumption
control

Other

Operation Mode
Maintenance Mode
• Set it is under maintenance
(Report is stopped while this mode
is set)
®
Monitor, BIOS SETUP, and Web Console.
Default
Server 1,
Server 1
Server 2
Default
N+1 2N, N+1, N
Performance,
Performance Keep,
Recover
Passive,
Passive
Active
Default
Enable,
Disable
Disable
51
Option Setting Procedure
EXPRESSSCOPE
Monitor
→ System Menu
System Web Console
→ Settings
→ Hardware Settings
Option Setting Procedure
System Web Console
→ Settings
System Web Console
→ Settings
System Web Console
→ Settings
Option Setting Procedure
EXPRESSSCOPE
Monitor
→ System Menu
System Web Console
→ Settings
®
→ Mode Settings
→ Mode Settings
→ Mode Settings
®
→ Mode Settings