Collecting User-Mode Process Dump (Dr. Watson Diagnostics Information); Collecting Memory Dump - NEC Express5800/A1080a User Manual

Collecting User-Mode Process Dump (Dr. Watson
Diagnostics Information)
This section describes how to collect diagnostics information related to application error.
Refer to "Acquiring User-Mode Process Dump" of "Introduction" for more details.

Collecting Memory Dump

This section describes how to collect dumped contents of memory at a failure.
There are two ways of collecting memory dump. Choose one of the below.
● Operate the navigation button of EXPRESSSCOPE
"Serverx → SVRx Control → SVRx For Maint→ SVRx Force Dump."
● Connect to the Web console, and then press "Force Dump" button from Summary (sub
menu).
To collect memory dump, each OS require its settings. Refer to "Introduction" for more details.
IMPORTANT:
● Collect memory dump after consulting the person who is managing
● When the system restarts after the failure, it may show a message
● Request the analysis of collected memory dump to a company
the system or (if necessary)the maintenance service company. If
logs are collected when the system is properly operating, the system
may become unstable.
indicating that there is a shortage of virtual memory. Simply
continue the system startup. If the system is reset and then restarted
once again, the collection of dump will fail.
di t
®
Monitor. From the operation menu, go to
t t t
555
Operation and Maintenance