Restore Defaults Menu - NEC Express5800/A1080a User Manual

Box Menu

Restore Defaults Menu

When LCD Guard Mode is set to "Disable," the screen moves to Box Menu．Restore Defaults
Menu by selecting and executing "Restore Box >" in the Box Menu status.
R e s t o r e
R e s e t
R e s e t
R e t u r n
 Select "Up" or "Down" button to move within Restore Defaults Menu.
 The leftmost " " indicates the currently selected item.
 Press "OK" to execute the menu item.
 Only either of MGMs is displayed for "Reset Param MGM1" or "Reset Param MGM2" item.
When executing "Reset Param MGM2" with "Reset Param MGM1" selected, MGM1 is reset.
"Reset Param
®
EXPRESSSCOPE
 When selecting and executing "Reset Param MGM1" or "Reset Param MGM2," the MGM
setting restores to the factory default. The selected MGM is reset as a result.
Assumed situation is that the MGM is unable to operate cooperatively with other MGM when it
is added or replaced for maintenance.
 Select and execute "Return" to return to Box Menu.
 Menu of the below image is displayed when selecting and executing "Reset Param MGM1,"
"Reset Param MGM2" or "Reset Param Box."
R e s e t
E x e c u t e
R e t u r n
 When selecting and executing "Execute," restore defaults is performed and Management
Firmware is reset afterward.
B o x
P a r a m
P a r a m
MGM2" becomes
Monitor is down and the main screen is displayed again.
P a r a m
M G M 1 >
M G M 2 >
selectable in Restore
M G M 1
267
Hardware
Defaults Menu after