NEC Express5800/A1080a User Manual page 146

Hardware
8. Mount rack nuts fixing the server to the rack at four positions circled in red shown below
(image of mounting the server to rack).
9. Remove the server from the box carefully and place it on a flat surface gently.
IMPORTANT:
Mount all rail assemblies before mounting servers when multiple
servers are mounted.
NOTE:
There are two types of rack nuts for the square hole and round
hole of the rack.
Mount rack nuts to be positioned in the center of
rd th
the 3 U and the 7 U from the punch mark of
装置下端から3U 目と7U 目の中央 装置下端から3U 目と7U 目の中央
the rack on the lower side of the server.
に位置するように取り付けます。 に位置するように取り付けます。
146
7U 7U
6U 6U
5U 5U
4U 4U
3U 3U
2U 2U
1U 1U