Partition<X>/Nic1 Target; Partition<X>/Biossettings1 Target - NEC Express5800/A1080a User Manual

Hardware
partition<X>/nic1 target
This target is for the network settings of the server.
The usage is as same as the system1/nic1 target.
partition<X>/biossettings1 target
This target is for the BIOS settings of the server.
Beacause it is possible to start up the server with the least information of the BIOS SG settings,
the automatic OS boot is possible by using macro script.
Because the full SG information of the BIOS can not be set by SMASH-CLP, use Web Console
if necessory.
Below shows the property of the target.
Settings
Proc_{one,two,three,f
our,five,six,seven,eig
ht}
Dimmone_{one,two,
...,nine}
Dimmone_{one,two,
...,six}_{zero,one,
nine}
Dimmtwo_{one,two,
...,nine}
Dimmtwo_{one,two,
...,six}_{zero,one,
nine}
MemoryMirroring
Description
Disable/Enable the processor by socket rather than core.
It is possible to configure 4 or less sockets in a partition.
1partition. Always 4,the maximum number, of the properties are
displayed regardless how many sockets are configured.
Proc_{one,two,three,four} = Settings for Domain1
Proc_{five,six,seven,eight} = Settings for Domain2
Settings: Enable=1, Disable=2
Disable/Enable the DIMMs in Domain1
It is possible to configure 64 or less DIMMs in a partition.
Always 64,the maximum number, of the properties are displayed
regardless how many DIMMs are configured.
The status of the DIMMs which are specified at system starting up
are not applied completely.
Settings: Enable=1, Disable=2
Disable/Enable the DIMMs in Domain2
Same as above.
Memory configuration
Settings:
0=Disable, 1=Socket Mirroring, 2=PMM Mirroring
498