Bundled Software for the Server
This section introduces the software bundled with the server and briefly describes how to install
the software. Refer to the online document for details.
NEC ESMPRO Agent (for Windows)
NEC ESMPRO Agent (for Windows) is the application for monitoring server which is to be
installed in the server.
Preparation before Installation
To operate NEC ESMPRO Agent, the driver for NEC specific device needs to be installed and
TCP/IP of the target OS and TCP/IP related components need to be set.
To use Windows Server 2008, install the IPMI driver by following the Microsoft® Windows Server
2008 Enterprise/Microsoft® Windows Server 2008 Datacenter Installation Guide.
To use Windows Server 2008 R2, install the IPMI driver by following the Microsoft® Windows
Server 2008 R2 Enterprise/Microsoft® Windows Server 2008 R2 Datacenter Installation Guide.
Network Service Setting
Use TCP/IP for protocol. Refer to "Help" which can be started from the start menu for TCP/IP
setting.
SNMP Service Setting
Set "public" or an arbitrary name for community name of trap, and set the IP address of the
management PC, etc. in which NEC ESMPRO Manager is installed as the destination for
sending traps to.
Refer to the online document "NEC ESMPRO Agent Installation Manual" in "NEC
EXPRESSBUILDER".
NOTE:
Notes on operation are described in the online document "NEC
ESMPRO Agent Installation Manual" in the attached "NEC
EXPRESSBUILDER" for your reference.
509
Software