HDD Test
(1) Outline
Random read test
This test reads randomly-selected blocks from a media and check if the data is properly
transmitted.
When the blocks are read 200 times, the test round counts up one
(This does not mean all the blocks on the disk can be read in one round).
(2) Message
1. Standard message
Message
Device information is as
follows.
Product name : xx
Firmware rev. : xx
Channel
: xx
SCSI ID
: xx
LUN
: xx
Transfer block : xx
Vender name of device, product name, FW revision and
others are displayed.
Randomly reading test is started.
Test information is displayed.
Test ended normally.
595
Operation and Maintenance
Content