NEC Express5800/A1080a User Manual page 474

Hardware
Start
Stop
Version
-> help oemnecsol
Command Name: oemnecsol
Used to
Usage: oemnecsol <baudRate>
・ load
The format of load command is shown below.
load –source <URI> [<options>] [<target>]
<URI> : Only "tftp" is available
<options> : listed below are available.
option
-oemnecfiletype [bmc|bios|sg]
-oemnecduplicate
Execute the command such as below when updating the management firmware.
-> load –source tftp://192.168.1.1/rom.ima.update
Function
Specify the firmware kind to be uploaded.
If omitted,then "bmc" is specified by default.
bmcfw: the management firmware
bios: BIOS
sg: SG restore
If A1080a-D Model, update the management firmware
on both management board at the same time.
The "bmc" option can be used simultaneously.
HINT:
•Before executing this command, the TFTP server should be
configured. Because
protocol,the security setting might be required depending on
the user's environment.
By pressing CTRL + C, it is possible to interrupt the command
during TFTP network communication.
IMPORTANT:
•After updating the management firmware, the new firmware is
started up by reseting the management firmware.
"UDP/69 is
474
used for the TFTP