Hardware
・ cd
The format of cd(Change default target) command is shown below.
cd [<target>]
Below are the examples.
-> cd partition1
COMMAND COMPLETED :
cd partition1
ufip=/partition1
-> cd
COMMAND COMPLETED :
cd
ufip=/partition1
-> cd partition1/
COMMAND SYNTAX ERROR :
cd partition1/
・ dump
The format of dump command is shown below.
dump –destination <URI> <target>
<URI> : Only "tftp" is available
<target> : It is possible to select each partition(server) and save SG information per each
partition(server).
For example, execute the command such as below when saving the SG informarion for the
partition1.
IMPORTANT:
•If "/" is added at the end of the target name, it is treated as an
error.
472