Table of Contents
Advertisement
Hardware
2.5.3
Serial Over LAN
Serial Over LAN is displayed by selecting "Settings" and clicking "Serial Over LAN" of the
menu on the left side of the screen.
SOL (Serial Over LAN)transfer rate of the server can be set in Serial Over LAN.
(1)
(3)
(1)
Selecting "Enable Serial Over LAN" enables to select Enable/Disable for SOL.
(2)
Selecting "Baud Rate" enables to set the transfer rate of SOL.
Selection Options
9600 bps
19.2 kbps
38.4 kbps
57.6 kbps
115.2 kbps
(3)
Clicking "Submit" enables to set the information of (2).
IMPORTANT:
This setting is not necessary when using SOL console from
SMASH-CLP.
(2)
422
Advertisement
Table of Contents
Troubleshooting
