Table of Contents
Advertisement
Hardware
2.10 Fault Information
Fault Information is displayed by selecting "Fault Information" from the left side of the screen.
Fault information of hardware unit is displayed in Fault Information.
(1)
(2)
(1)
Clicking "Clear All" enables to delete Fault sensor in a batch.
(2)
Clicking "Enable/Disable" enables to move to Enable/Disable Component screen.
(3)
Display Fault sensor information.
Name
Status
IMPORTANT:
• When one of the server in the system is powered on, you can not
execute this.
Please make sure all the server in the system are powered off
before executing this.
: Fault sensor status
: Status
IMPORTANT:
• When a pair of DIMMs are not configured in the PAIR, the fault
sensor information such as "Name : PMMx DIMMpy (x=1-8),y=1-8)"
for the PAIR will not be displayed.
440
(3)
Advertisement
Table of Contents
Troubleshooting
