Cable Connection - NEC Express5800/53La User Manual

9-18 Upgrading Your Workstation
IMPORTANT: To disable the RAID configuration, be sure to perform
[Clear Configuration] before changing the jumper switch setting. See
"Others" in "RAID Configuration" described in Chapter 4.

Cable Connection

Connect the interface cable of the first hard disk drive to SATA0 connector on mother board.
Connect the interface cable of the second hard disk drive to SATA1 connector on mother board.
Power
unit
Mother board
SATA cable for hard disk drive
SATA cable for optical disk drive
Second hard disk drive
Optical disk drive
First hard disk drive