System Bios ~ Setup - NEC Express5800/53La User Manual

4-2 Configuring Your Workstation

SYSTEM BIOS ~ SETUP ~

The SETUP utility is provided to make basic hardware configuration for the workstation. This
utility is pre-installed in the flash memory of the workstation and ready to run.
The workstation is configured with the correct parameters using the SETUP utility and shipped in
the best conditions. Thus, you don't need to use the SETUP utility in most cases. However, you
might wish to use the SETUP utility in the cases described below.
IMPORTANT:
The SETUP utility is intended for system administrator use only.
The SETUP utility allows you to set a password. The workstation is
provided with two levels of password: Supervisor and User. With
the Supervisor password, you can view and change all system
parameters of the SETUP utility. With the User password, system
parameters available for viewing and changing are limited.
Do not set any password before installing the OS (operating
system).
The workstation contains the latest version of the SETUP utility.
Dialog boxes appear on your SETUP utility, thus, may differ from
descriptions in this manual. If you find anything unclear, see the
online help or ask your sales representative.
The workstation does not require BIOS parameter to select the OS.
Setting of Plug-and-Play feature is not required.