Table of Contents
Advertisement
4-18 Configuring Your Workstation
Peripheral Configuration
The following screen appears if you select [Peripheral Configuration] on the Advanced menu.
Available options in this menu are listed below.
Option
Parameter
Serial Port A
[Enabled]
Disabled
Base I/O
[3F8h]
Address
2F8h
3E8h
2E8h
Interrupt
IRQ 3
[IRQ 4]
Serial Port B
[Enabled]
Disabled
Base I/O
3F8h
Address
[2F8h]
3E8h
2E8h
Interrupt
[IRQ 3]
IRQ 4
PS/2 Mouse
Disabled
[Enabled]
Audio
[Enabled]
Disabled
Legacy USB
[Enabled]
Support
Disabled
SATA RAID
[Disabled]
Enabled
Description
Enables or disables serial port A.
Specify the I/O address for serial port A.
Specify the interrupt (IRQ) for serial port A.
Enables or disables serial port B.
Specify the I/O address for serial port B.
Specify the interrupt (IRQ) for serial port B.
Enables or disables mouse.
Enables or disables the internal audio
controller.
Specify whether the USB keyboard is made
available in OS which does not support USB
formally. This menu appears only when
"Enabled" is selected for [USB Controller].
Shows RAID configuration jumper switch
setting. (View only)
Your Setting
[
]: Factory-set
Advertisement
Table of Contents
Troubleshooting
