NEC Express5800/53La User Manual page 96

4-24 Configuring Your Workstation
The table below shows the operation when the AC power to the workstation is turned off once and
then on again, depending on the setting of [AC LINK].
Parameter AC-OFF after Shutdown (DC-Off)
StayOff DC-OFF (Standby)
LastState DC-OFF (Standby)
PowerOn DC-On and boot
IMPORTANT: Be sure to run POST after changing the parameter for
[AC-LINK] to let the feature works correctly.
If the workstation is powered off by pressing the POWER/SLEEP
switch for 4 seconds or longer, always run the OS and then power off
the workstation in usual way.
UPS control and unexpected AC-OFF
DC-OFF (Standby)
DC-On and boot
DC-On and boot