Function Of Maintenance Tools - NEC Express5800/53La User Manual

Function of Maintenance Tools

The following functions can be executed in the Maintenance Tools.
Maintenance Utility
The Off-line Maintenance Utility is started in Maintenance Utility. The Off-line
Maintenance Utility is an OS-independent maintenance program. When you are unable to
start the OS-dependent NEC ESMPRO to troubleshoot a problem, the Off-line
Maintenance Utility can be used.
IMPORTANT:
The Off-line Maintenance Utility is intended for use of your service
representative. The NEC EXPRESSBUILDER DVD you have
created contains a file that describes operation of the utility, but do
not attempt to use the utility by yourself. Contact your service
representative and follow instructions.
See the on-line help for details of the Off-line Maintenance Utility.
For further information, ask your service representative.
The Off-line Maintenance Utility provides the following feature.
– System Information Management
Provides the function to make a back-up copy of your data.
Without the backup data, the system-specific information and/or configuration may not
be restored.
Only the authorized personnel is allowed to restore the backup data.
BIOS/FW Updating
This menu allows you to update the software module such as BIOS and firmware of the
workstation by using the update disk (3.5-inch floppy disk) that is distributed from NEC
customer service representative.
After rebooting the system, an update program is started automatically from floppy disk,
and the various BIOS and firmware programs are updated.
IMPORTANT:
program is running. If the update processing is discontinued, the system
becomes unable to start.
ROM-DOS startup FD
Creates a support disk for starting the ROM-DOS system.
Do not turn off the workstation while the update
Maintenance 7-11