NEC Express5800/53La User Manual page 248

9-28 Upgrading Your Workstation
14.
Run BIOS SETUP Utility and select [Advanced] - [Memory Configuration] - [Installed
memory] in the order to make sure that the installed DIMMs are correctly recognized. See
Chapter 4 for details.
IMPORTANT: The value shown in [Installed memory] may be smaller
than the actual physical memory capacity, depending on the
configuration of PCI board or others. The same value is also shown in
memory count during POST, BIOS SETUP Utility, and System
Information of OS.
15.
Run the BIOS SETUP Utility, and select [Advanced] - [Reset Configuration Data] - [Yes].
This is required to update the hardware configuration information. See Chapter 4 for
details.
16.
Set the paging file size to the recommended value or larger.
See Chapter 5 for details.