NEC Express5800/53La User Manual page 143

Setup Team
Adapter Fault Tolerance (AFT) is a feature that creates a group containing more than one adapter
and automatically converts the process of the working adapter to the other adapter in the group
when any trouble occurred on that adapter.
Adaptive Load Balancing (ALB) is a feature that creates a group containing more than one adapter
and enhances the throughput by operating packet transmission from the server by all the adapters.
This feature includes AFT feature.
Switch Fault Tolerance (SFT) is a feature that provides a failover relationship between two ports
when each port is connected to a separate switch.
SFT supports two ports per team.
Static Link Aggregation (SLA) accounts for the GEC and 802.3ad static protocols.
SLA is a switch-assisted teaming mode and requires configuring ports at both ends of the link:
server interfaces and switch ports.
IMPORTANT:
The adapters specified as a group of Adaptive Load Balancing
(ALB) can be connected to only Switching Hub.
Confirm the port setting of switching hub (L2) matches the server
network adapter Teaming mode.
All the adapters specified as a group of Adapter Teaming must
exist on the same LAN.
If they are connected to the separate switches, they will not work
normally.
Refer to <Remove Team> and delete the team first before
executing the following work.
– Exchange of mother board and LAN board
– Change the mode type of the team
Installing the Operating System with Express Setup 5-23