3-6 Setting Up Your Workstation
PREPARATION FOR INSTALLATION
With Vertical Installation
When you want to install the workstation vertically, first remove the stabilizers from bottom of the
workstation to place the workstation vertically.
You need to install the air duct on top of the workstation to keep the cooling effect in the
workstation.
Installing Air Duct
Engage hooks (4 places) with the slots on
the workstation, and insert them.
IMPORTANT: To keep the cooling effect in the workstation, the air
duct must be installed. In addition, do not install the workstation with
the air holes being covered with the wall or the like.
Hooks on air duct
(4 places)