Figure 4.4:Icom Tools User Interface; Configuring A Port - Advantech PCI-COMM Series User Manual

Click OK to bring up the ICOM Tools User Interface such as below:
Figure 4.4: ICOM Tools User Interface

4.4.2 Configuring a Port

You can choose to configure a specific port (or to configure all ports)
before running your test. Just click a Com Port Tab to select the port you
want to configure, and then click the Port Setup button or use the
Port/Setup menu command (or if you want to configure all ports at once,
just click the All Ports Setup button or access the All Ports/Setup
menu command) to bring up the Configure Port dialog box such as
below.
PCI-COMMUNICATION User Manual 68