Page 1
PCIE-1752 64-ch Isolated Digital Output PCI Express Card User Manual...
Page 2
No part of this man- ual may be reproduced, copied, translated or transmitted in any form or by any means without the prior written permission of Advantech Co., Ltd. Information provided in this manual is intended to be accurate and reli- able.
Page 3
Product Warranty (2 years) Advantech warrants to you, the original purchaser, that each of its prod- ucts will be free from defects in materials and workmanship for two years from the date of purchase. This warranty does not apply to any products which have been repaired or...
Page 4
This product has passed the CE test for environmental specifications when shielded cables are used for external wiring. We recommend the use of shielded cables. This kind of cable is available from Advantech. Please contact your local supplier for ordering information.
Page 5
Before setting up the system, check that the items listed below are included and in good condition. If any item does not accord with the table, please contact your dealer immediately. • PCIE-1752 DA&C Card • StartUp or User Manual • Companion DVD-ROM with DAQNavi drivers included...
2,500 V , preventing your host system from any incidental harms. Wide Output Range The PCIE-1752 also features a wide output voltage range from 5 to 40 , suitable for most industrial applications with 12 V /24 V out- put voltage.
Page 11
Board ID Setting The PCIE-1752 has a built-in DIP switch that helps define each card’s ID when multiple cards have been installed on the same PC chassis. The board ID setting function is very useful when users build their system with multiple PCIE-1752 cards.
• BCD interfacing • Digital I/O control • Industrial and lab automation 1.3 Installation Guide Before you install your PCIE-1752 card, please make sure you have the following necessary components: PCIE-1752 DA&C Card PCIE-1752 StartUp or User Manual Driver Software Advantech DAQNavi software (included in DVD-...
1.4 Software Overview Advantech offers a rich set of DLL drivers, third-party driver support and application software to help fully exploit the functions of your PCIE-1752 card: • DAQNavi software (on the companion DVD-ROM) • LabView driver • Advantech DAQ tools Programming choices for DA&C cards...
• Borland Delphi For instructions on how to begin programming works in each develop- ment tool, Advantech offers Tutorial Chapter in the DAQNavi SDK Man- ual for your reference. Please refer to the corresponding sections in this chapter on the DAQNavi SDK Manual to begin your programming efforts.
PCIE-1752 card. These accessories include: Wiring Cables PCL-10250 The PCL-10250 is a 100-pin SCSI to two 50-pin SCSI shielded cable that specially designed for PCIE-1752 card. It should be used with ADAM-3951 wiring board. PCL-101100M The PCL-101100M cable is a 100pin SCSI shielded cable.
Page 17
Installation This chapter provides a packaged item checklist, proper instructions for unpacking and step-by-step procedures for both driver and card installation. Sections include: • Unpacking • Driver Installation • Hardware Installation • Device Setup & Configuration...
Chapter 2 Installation 2.1 Unpacking After receiving your PCIE-1752 package, please inspect its contents first. The package should contain the following items: • PCIE-1752 DA&C Card • StartUp or User Manual • Companion DVD-ROM with DAQNavi drivers included. The PCIE-1752cards harbor certain electronic components vulnerable to electrostatic discharge (ESD).
2.2 Driver Installation We recommend you install the driver before you install the PCIE-1752 card into your system, since this will guarantee a smooth installation pro- cess. The Advantech DAQNavi Device Drivers Setup program for the PCIE- 1752 card is included in the companion DVD-ROM that is shipped with your DA&C card package.
Select the PCIE series and the specific device then follow the installation instructions step by step to complete your device driver installation and setup. Back and select the DAQNavi SDK to install the Advantech Navi- gator. Figure 2.2: DAQNavi Installation Setup Screen...
Installation) After the Device Drivers installation is completed you can install the PCIE-1752 card into any PCI Express slot on your computer. However, it is suggested that you refer to the computer’s user manual or related docu- mentation if you have any doubts. Please follow the steps below to install the card onto your system.
2.4 Device Setup & Configuration The Advantech Navigator program is a utility that allows you to setup, configure and test your device, and later stores your settings on the sys- tem registry. These settings will be used when you call the APIs of DAQNavi device drivers.
Configuring the Device Please go to the Digital Input/Output page to configure your device. Here you can not only enable/disable the Channel-Freeze function but also the DO ports initial status of PCIE-1752. Figure 2.4: The Digital I/O Setting Page Chapter 2...
Device Test page to test your hardware by using the testing util- ity supplied. Figure 2.5: The Device Testing of PCIE-1752 For more detailed information, please refer to the DAQNavi SDK Manual or the User Interface Manual in the Advantech Navigator. PCIE-1752 User Manual...
Page 25
Signal Connections This chapter provides useful informa- tion about how to connect input and output signals to the PCIE-1752 cards via the I/O connector. Sections include: • Overview • Switch and Jumper Settings • Signal Connections • Field Wiring Considerations...
PCIE- 1752 cards via the I/O connector. 3.2 Switch and Jumper Settings Please refer to Figure 3.1 for jumper and switch locations on PCIE-1752. Figure 3.1: Connector and Switch Locations PCIE-1752 User Manual...
3.2.1 Board ID (SW1) The PCIE-1752 have a built-in DIP switch (SW1), which is used to define each card’s board ID. When there are multiple cards on the same chassis, this board ID switch is useful for identifying each card’s device number.
Default configuration (Default setting) 3.2.3 Channel-Freeze Function (JP2) The PCIE-1752 provides the channel-freeze function for isolated digital output channels. When Channel-Freeze function is enabled, all ports on the card will be locked so that the data transmitted (from the host PC) to the card won’t be transferred to the DO ports.
3.3 Signal Connections Pin Assignment The I/O connector on the PCIE-1752 is a 100-pin connector that enable you to connect to accessories with the PCL-10250 or PCL-101100M shielded cable. Figure 3.2 shows the pin assignments for the 100-pin I/O connector on the PCIE-1752, and Table 3.4 shows its I/O connector signal description.
*Note: The PCL-10250 shielded cable is especially designed for the PCIE-1752 to reduce noise in the signal lines. Please refer to Appendix C for the pin assignment of connecting PCL-10250 and ADAM-3951. 3.3.1 I/O Connector Pin Definition Table 3.4: I/O Connector Signal Descriptions...
Figure 3.3: Isolated Digital Output Connection 3.3.3 Channel-Freeze Function The PCIE-1752 provides a digital input channel (CH_FRZ_IN) to enable the channel-freeze function. The channel-freeze function acts when the pin CH_FRZ_IN is activated. Moreover, you can setup the input mode of channel-freeze function input channel CH_FRZ_IN as dry contact input mode or wet contact input mode selected by on-board jumper JP2.
Figure 3.5: Wiring in dry contact input mode 3.4 Field Wiring Considerations When you use PCIE-1752 cards to acquire data from outside, noises in the environment might significantly affect the accuracy of your measure- ments if due cautions are not taken. The following measures will be help- ful to reduce possible interference running signal wires between signal sources and the PCIE-1752 card.
Appendix C ADAM-3951 Pin Assignment Please refer to Figure C.1 and Figure C.2 for the pin assignments if you select Advantech ADAM-3951 as your wiring board for connecting to PCL-10250 and PCIE-1752. Figure C.1: Connect to PCL-10250 CON1 PCIE-1752 User Manual...