System Information; Telephone Lines - Talkswitch DESKTOP PHONE SYSTEM User Manual

Call Back / Call Bridge Settings
TalkSwitch's Call Back and Call Bridge features are configured from this folder.
Both of these features can reduce your company expenses by reducing long
distance costs.
Options
In this folder, advanced settings are configured including troubleshooting issues
and various operating options. Recommended for experienced users only.

2.3.1 System Information

2.3.1.1 Telephone Lines

This section tells TalkSwitch about the telephone lines plugged into its back panel.
Simply select a line and fill in the information. For each line there is a status message
("Line detected at initialization") indicating if TalkSwitch detected a line plugged
into each of its line port. If a line is plugged into a line port and is not detected, check
your telephone line, and then choose File>Retrieve settings to update the screen.
In the "Phone numbers" section:
Enter the 'main' telephone number for the appropriate line connected to
TalkSwitch. Enable the Distinctive Ring Numbers 1 and/or 2 if you have this
service on the current line and wish to have incoming calls handled 'differently'
on the basis of the distinctive ring. If you want Distinctive Ring numbers handled
14 TalkSwitch User Manual