Talkswitch DESKTOP PHONE SYSTEM User Manual page 73

Step # 2
When you select and click on the appropriate version for download, a screen will
appear asking you what you would like to name the file you are about to download,
and in which folder/directory you would like to save it. We suggest leaving the file
name 'as is' (install.exe) and saving it on your Desktop. Once the download is
completed, you can begin your upgrade by double clicking on the 'install.exe' file or
use the 'Run' option on your Windows 'Start' menu. A series of screens will guide you
through the installation process.
Step # 3
The final step in the upgrade process is to open the TalkSwitch software and select
'Flash Upgrade' from the main splash screen. A screen will appear warning you not
to interrupt the update process once it has begun. Click on the "Yes" button to
proceed. A second screen will then appear asking you to select the appropriate update
(.bin) file. If you see more than one .bin file, select the most recent file (the one with
the highest number).
Highlight the newest firmware file, then click the "Open" button.
The final stage of the update process will take approximately 3 minutes, during
which time the LED lights on TalkSwitch's front panel will flicker.
When the update is complete, the following screen will appear:
Click the "OK" button and the TalkSwitch software will then close. There is no need
to restart Windows or TalkSwitch - your updated TalkSwitch Firmware is now ready
to go!
In the event the firmware update was unsuccessful, please try the update process
again and follow the instructions. If you continue to have problems please contact
Centrepoint Technologies.
Firmware updates will not alter your system configuration. In the event of a major
system update, it may be necessary for the configuration file to be reset to default
values. In this case you will need to reconfigure the entire system. In the case of a major
system update, Centrepoint Technologies will mention any issues involved with the
firmware update.
3.0 Using TalkSwitch 71