Setting up your library includes actions such as unpacking, connecting power cords and SCSI cables,
setting SCSI IDs, and preparing the host computer. The actions discussed here are those you would need
the first time you set up your library and if your library is ever moved or reconfigured.
Information on turning the library on and off, is located in
everyday tasks.
Quick Start Guide
For simple setup instructions, refer to the Quick Start Guide available on the Scalar 100 Documentation and
Software CD or as a printed document in your product box. For more detailed instructions, refer to the
Getting Started Road Map
To view the Quick Start Guide, you need to have Adobe
www.adobe.com/acrobat/
Getting Started Road Map
To set up your Scalar 100 for the first time, complete all the basic steps listed here.
1
Find a location for your library.
See
Finding a Location
2
Unpack your library.
See
Unpacking your Library
3
Install any optional or additional hardware that you ordered for your library.
See
Installing and Removing Hardware
4
Connect the power cords and SCSI cables.
See
Connecting the Power and SCSI Cables
5
Turn on the library.
See
Turning on the Library
6
If necessary, set the SCSI IDs for the library and drives so that they are unique from any other device
on the SCSI bus.
See
Configuring your Library
Scalar 100 User's Guide
Setting up your Scalar 100
on page 23.
to download a free copy.
on page 24.
on page 24.
on page 31.
on page 25.
on page 63.
on page 71.
Running your Library
on page 63, as it is part of
®
®
®
Acrobat
Reader
installed. Go to
23