Working With Data Cartridges; Importing Cartridges - ADIC FastStor 2 User Manual

The autoloader powers up.

Working with Data Cartridges

The following describes how to work with your data cartridges. For specific information about
allowed autoloader data cartridges, see Specifications.

Importing Cartridges

This option commands the autoloader to import a cartridge into a specific empty slot on the
carousel.
Performing an import or export of media during a data backup may
CAUTION:
result in adverse results, which could include backup failure or other
errors.
To import tapes into the autoloader
1. Make sure the write-protect switch is set as desired for each data cartridge (see
Protecting Cartridges).
2. From the Home Screen or main menu, press + or – until Command appears on the top line of
the LCD screen.
3. Press ENTER to access the available options.
4. Press + or – until the Import message appears on the LCD screen. Press ENTER to select.
5. Press + or – until the desired slot number appears on the LCD screen and press ENTER.
You are not given the option to import a cartridge to an occupied slot.
6. When the Insert Cartridge Slot message appears on the LCD screen and the mail slot opens,
insert the desired data cartridge into the mail slot so that the write-protect switch is facing out
from the autoloader.
Working with Data Cartridges
Write-
31