Edirol UA-1EX Owner's Manual page 63

Usb audio interface
Hide thumbs Also See for UA-1EX:
Table of Contents

Advertisement

Depending on the virtual memory setting or network-related settings, noise may occur.
Please make the following settings before use.
• [Mac OS 9] In Chooser of the Apple menu, set AppleTalk to "Inactive."
(This setting is not changed as a result of turning off AppleTalk, as requested by OMS when
sequencer software is started up. You must change the setting yourself using the "Chooser.")
• [Mac OS 9] In the "Memory" Control Panel, set Virtual Memory to "Off."
• Depending on the way in which you connect to the Internet, use the UA-1EX with the following
settings.
If you connect to the Internet via a LAN cable
Use while the LAN cable is connected.
If you connect to the Internet via the internal modem port, or are not connected to the
Internet
In the "TCP/IP" Control Panel, set "Connect via" to "PPP."
After you have made the settings, restart your Macintosh.
* Do not use software that accesses the network (such as a Web browser) at the same time that you are using
sequencer software or audio editing software.
Playback/recording stops midway, and subsequent playback/
recording is not possible
While you were using the UA-1EX, could your computer have performed a task with a
heavy processing load, such as accessing a CD-ROM drive or network?
If a heavy processing load occurs while the UA-1EX is being used, it may not work correctly. In this
case, stop playback/recording, and then start playback/recording once again. If you are still unable
to play/record correctly, close all sequencer software that had been using the UA-1EX, and re-connect
the UA-1EX.
Digitally recorded sound has distortion, the wrong pitch, or contains
noise
Is the sampling frequency setting in your sequencer software the same as the sampling
frequency of the digital device connected to the digital input connector?
Set your software and the UA-1EX to the same sampling frequency.
If you change the UA-1EX's sampling frequency, you must disconnect the UA-1EX, and then re-
connect in order for the new setting to take effect.
63

Hide quick links:

Advertisement

Table of Contents
loading

Table of Contents