Driver Settings; About The Input And Output Devices - Edirol UA-1EX Owner's Manual

Driver Settings

In order to get the best performance from the software you are using, you must choose the correct
device settings.

About the input and output devices

Output device
EDIROL UA-1EX
This sends the audio signal from the computer to the UA-1EX. This is what you will nor-
mally use, for example when using the UA-1EX with an sequencer software such as Media
Player. You will also use this when using an sequencer software such as SONAR in WDM
driver mode, or when using a DirectSound software.
Input device
EDIROL UA-1EX
This receives the audio signal that is sent from the UA-1EX itself to the computer. This is
what you will normally use, for example when using the UA-1EX with an sequencer soft-
ware such as Media Player. You will also use this when using an sequencer software such
as SONAR in WDM driver mode.
ASIO device
EDIROL UA-1EX
Use this if you are using the UA-1EX with an ASIO-compatible sequencer software such
as Cubase. In the ASIO settings of your sequencer software, choose "EDIROL UA-1EX."
* To prevent audio loop feedback or double monitoring, turn monitoring off in your sequencer
software, or set your sequencer software to use ASIO Direct Monitor.
22