Edirol UA-1EX Owner's Manual page 18

13.
Operation of the UA-1EX
A message of "Found New Hardware" will appear. Please wait.
* This unit is equipped with a protection circuit. A brief interval (a few seconds) after connecting the UA-
1EX is required before the unit will operate normally.
Windows XP users
1. The Found New Hardware Wizard dialog box will appear.
If the message "Connect to Windows Update to search for software?" appears, choose "No"
and then click [Next].
2. Make sure that "EDIROL UA-1EX" is indicated. Then, choose "Install the software
automatically (Recommended) " and click [Next].
If "Driver Signing Options" in step 4 is set to anything other than "Ignore," a dialog box with
an "!" symbol will appear. Click [Continue Anyway] to proceed with the installation.
Windows 2000 users
If "Driver Signing Options" in step 4 is set to anything other than "Ignore," a dialog box
indicating "Digital Signature Not Found" will appear. Click [Yes] to proceed with the
installation.
14. The Completing the Found New Hardware Wizard dialog box will appear.
Click [Finish].
15. In the Driver Setup dialog box, click [Close].
This completes driver installation.
If the Change System Settings dialog box appears, click [Yes]. Windows will restart
automatically.
* If you changed the "Driver Signing Options" setting in step 4, restore the original settings after
Windows has restarted.
Next, in order to ensure that audio processing occurs smoothly, you need to make settings so that
Background Services is given priority.
(➔ "Giving priority to Background Services" (p. 19))
18
Connect the UA-1EX to your computer.