Edirol UA-1EX Owner's Manual page 14

Input monitor switch
●
This selects whether or not the audio signals that are input through the mic input jack
input connector
output jacks
6
ON Switch set to the lower position
AUTO
Switch set to the upper position
(OFF)
* If the recording source select switch is set to DIGITAL, input monitoring will always be ON regardless of the
setting of this switch.
Recording source select switch
●
This selects the input signal that will be sent via USB to your computer as the recording source.
Switch set to the lower position
ANALOG
DIGITAL Switch set to the upper position
* If the recording source select switch is set to DIGITAL and a digital signal is being input to the Digital input
connector, audio data from the computer cannot be played back.
14
, and Line input jacks
10
.
will be output to the headphone jack
4
The audio signal being received will be output to the
Headphone jack and the Line output jacks.
Input monitoring will be switched on/off from your
ASIO2.0 compatible sequencer software.(➔"Using
ASIO Direct Monitor (Windows/Mac OS 9)" (p. 43))
* The input signal will not be output if you're not using
the ASIO driver.
The analog audio signal from the mic input jack or
line input jacks will be sent to your computer.
The sound from the digital input connector will be
sent to the computer.
* If the DIGITAL position is selected, and no input
signal is being sent to the digital input connector, the
audio signal (sound) being output from the computer
via USB will pass through the UA-1EX and then
return to the computer.
, digital
3
and Line
11