Mac Os 9 Users; Installing The Ua-1Ex Driver; Installing The Asio Driver - Edirol UA-1EX Owner's Manual

Mac OS 9 Users

Installing the UA-1EX driver

1. With the UA-1EX disconnected, start up the Macintosh.
* Disconnect all USB cables except for a USB keyboard and USB mouse (if used).
2. Exit all currently running software (applications).
If you are using virus checking or similar software, be sure to exit it as well.
3. Prepare the CD-ROM.
Insert the CD-ROM into the CD-ROM drive of your Macintosh.
4. Double-click the UA-1EX Driver-E Installer icon (found in the Driver E (Mac OS 9) folder of the
CD-ROM) to start up the installer.
5. Verify the Install Location, and click [Install].
* The installation location will be shown differently depending on your system. Make sure that you have selected
the startup disk for the system you are currently using.
fig.05-20.e
6. If a message like the following is displayed, click
[Continue].
The other currently running applications will exit,
and installation will continue.
7. A dialog box will indicate Installation was successful.
Click [Restart] to restart your Macintosh.

Installing the ASIO driver

.
ASIO
This is an audio interface standard promoted by the Steinberg Corporation. When the UA-1EX is used
with ASIO-compatible software, the synchronization precision will be improved, allowing a more so-
phisticated music production environment.
30