Using Asio Direct Monitor (Windows/Mac Os 9) - Edirol UA-1EX Owner's Manual

Using ASIO Direct Monitor (Windows/Mac OS 9)

If you are using the UA-1EX from an ASIO2.0-compatible sequencer software in Advanced mode,
the UA-1EX's direct monitor switch can be controlled automatically from the sequencer software.
1. Set Input monitor switch to AUTO.
2. As described in"Opening the dedicated driver settings dialog box" (p. 44), open the "Edirol
UA-1EX Driver Settings" dialog box (or in Mac OS 9, "ASIO Control Panel").
3. Make the following settings.
Check the "Use ASIO Direct Monitor" check box.
4. Click [OK] to close the "Edirol UA-1EX Driver Settings" dialog box.
* Depending on your sequencer software, there may also be an ASIO Direct Monitor setting among the audio
settings of your sequencer software. For details, refer to the operation manual for your sequencer software.
* When using ASIO Direct Monitor, monitoring may switch on/off at unexpected times, depending on the
sequencer software settings and on the recording procedure. If this occurs, uncheck the check box in step 3 to
disable ASIO Direct Monitor.
43